KORE HP Series Diesel

All the performance and quality you would expect from KORE for your Dodge Ram 4x4.
This suspension system combines the HP Leveling kit with the rear of the Recon Series.  It's the fastest and easiest way to upgrade your diesel Ram to get a Power Wagon performance.  This kit provides about 1/2" more front wheel travel than a Dodge Power Wagon. KORE's legendary VR (variable rate) coils ride softer and resist bottoming far better than OE coils.  They will also raise the front up to 3 inches.  We say “up to 3 inches” because not all Dodge Ram stock coil springs are the same length to begin with. 

In back, KORE's mini leaf packs replace the stock bottom overload leaf to provide a smooth, progressive ride, maintaining the original towing and hauling capabilities. 

We do recommend after installing the kit to align the truck back to the stock configurations.

  This system will clear a 35x12.50x17 E rated tire as long as it is on a wheel that has the same backspace dimension as the stock rim.  The stock backspace for the 2003-2010 Dodge is 6.25” and the 1998-2002 is 5.50”.  If you use an aftermarket rim then you can expect to do some trimming on the existing fenders.  If you want to clear a 37x13.50 tire then you’ll have to either shave the existing fenders or install fiber glass fenders for the front and rear panels. 

• Variable Rate Coil
  
• Patented Billet Drop Blocks
• Up to 3.0 inches of lift in front  and 1.0 inches of lift in the rear
  
• Variable rate coils for Standard, Quad and Mega Cabs, Diesel
• Four top quality Bilstein 5100, 6681 and 6647 mono-tube shocks provide increased wheel travel
• Mini Leaf Packs with Zinc plated U-Bolts, Nuts and Washers
  
• Unparalleled highway ride
• Can be set back to stock
• No cutting, drilling or welding
• Fast, simple installation
• For 2003-2012 4x4 Models 

Installation Instructions are available in PDF format here